Central Heating & Heating Controller
The Hive Heating thermostat is located on the wall, in the hallway (to the left of the boiler cupboard door). The heating operates to a pre-set schedule but you may temporarily boost the heating using this controller. Press the Heating Boost button on the top of the thermostat. Press this button again to increase the duration of the heating boost.
Each radiator is temperature controlled by a radiator valve. Please set these to a comfortable temperature setting e.g. 4, and not to maximum to avoid overheating a room. The bathroom radiator is temporarily disconnected due to a leak. Apologies for any inconvenience this may cause.
Please turn the thermostat temperature down at the end of your stay.
Hot Water
The hot water turns on automatically when a hot tap or the shower is turned on (Combi boiler). There is no need to do anything else.
The boiler is 'Gas Safe' tested annually and all settings adjusted to ensure optimum operation. Do not change these boiler settings as this may reduce the operational effectiveness of the boiler, or even stop it working altogether.